Please check out the following video to learn more about the Ozeki VoIP GSM Gateway.
How to setup Ozeki VoIP GSM Gateway
1. What you need
In order to make calls from one of our software through a GSM network
you need to connect the Ozeki VoIP GSM Gateway and our software
together and you need to insert a SIM card into the Ozeki VoIP
GSM Gateway. In the Figure 1 you can see the accessories:
SIM card: It is used to provide a connection to a GSM service provider.
You can buy it directly from a GSM service provider.
Ozeki VoIP GSM Gateway: It can be used between the GSM
network and a few Ozeki software. It is a gateway that allows you
to make calls toward the Public Switched Telephone Network from the VoIP phone
network. You canorder it directly from Ozeki.
A communication software: For example Ozeki Dialer. It is a SIP VoIP software.
It allows you to make calls toward the GSM network with the help of
Ozeki VoIP GSM Gateway. You can order it
directly from Ozeki.
Figure 1 - Making calls from Ozeki Bulk Messenger through Ozeki VoIP GSM Gateway
2. Opening the box
After you have received the Ozeki VoIP GSM Gateway package (you can see
it in Figure 2) unpack the box.
Figure 2 - Ozeki VoIP GSM Gateway package
The Figure 3 shows the opened box with its content.
Figure 3 - The opened box
Take the accessories out of the box then you check them. The
Figure 4 shows what you can find in the box (from right):
1× Ozeki VoIP GSM Gateway
1× DC Power Adapter
1× Ethernet cable
In addition you can see a mini-SIM card (25.00 mm × 15.00 mm × 0.76 mm)
that will be inserted into a SIM card slot (Figure 3 on the left).
Figure 4 - The contents of the package + a mini-SIM card
3. Connecting the DC Adapter and a SIM card to each other
After that, you need to connect the Ozeki
GSM Gateway to a plug, to the computer network and you need to put one-four
SIM card(s) into the device.
The Figure 5 shows the slots where the SIM cards and the DC adapter have
to be plugged.
The DC adapter is plugged into the rightmost connector that is
signed with a DC12V label.
The SIM cards are plugged into the slots which are located between
the Channel 1-4 labels and the antennas. The chip on the SIM card
has to see up when you put it into the slot.
Figure 5 - DC adapter and SIM card slots 1 (SIM card out)
After you have inserted the SIM cards into the slots you need to push it while
a click is not listened (Figure 6).
Figure 6 - DC adapter and SIM card slots 2 (SIM card in)
4. Connecting the Ozeki VoIP GSM Gateway to a computer
If the SIM card and DC adapter have been plugged, you need to connect the Ozeki
GSM Gateway to a computer to set the IP address of the device.
To connect a gateway and a computer to each other you need to use a straight-through
Ethernet cable (the yellow cable on Figure 7). One of the ends of the cable
has to be plugged into the Ethernet port of the computer and the other has
to be plugged into the PC port of the Ozeki VoIP GSM Gateway.
Figure 7 - Connecting the Ozeki VoIP GSM Gateway to a PC
Now you can configure the Ozeki VoIP GSM Gateway in a web browser.
By default the IP address of the gateway's PC port is 192.168.8.1. To reach
the graphical user interface of the device you need to set an IP address on the
Ethernet port of the computer that is in the same network. The IP address of the
PC can be from the range of 192.168.8.2 - 192.168.8.254.
5. Network settings in the Ozeki VoIP GSM Gateway
Open a web browser, such as Internet Explorer and enter http://192.168.8.1
in the address bar. Then the login page is popped up (Figure 8) to give the
username in the User Name and password in the Password field (root username: admin;
root password: admin).
Figure 8 - Login to Ozeki VoIP GSM Gateway
After you have clicked on the Ok button, the Status page will
appear. To set the IP address of the gateway, click on the Configurations
and Network links. The Figure 9 shows what you need to set on the
LAN port mode: Static IP.
IP address: An address from the network to which you would like
to connect the gateway.
Subnet mask: The proper mask that belongs to the connected network.
Default route: The IP address of the default gateway. This is the
IP address of that router's interface which is connected to the local
Primary DNS: The IP address of the domain name server that is
responsible for assigning the IP addresses and the domain names.
Figure 9 - Network settings
Then click on the Save Changes and follow the below instructions:
Connect the gateway to the local computer network through the LAN port of
the device (Figure 10).
Disconnect the computer from the gateway and connect it back to the local
Set the IP address of the computer back.
Figure 10 - Connecting the gateway to the local computer network
After doing these settings, you can configure the Ozeki VoIP GSM Gateway from
any computer in the same computer network. Just type the previously set IP address
to the web browser, give the login data and you can configure it from anywhere.
6. What do you need to setup in the graphical user interface of the
Ozeki VoIP GSM Gateway
If you have inserted the SIM cards into the Ozeki VoIP GSM Gateway, you can
see the status of the SIM cards.
In the Figure 11 you can see that there are three SIM cards, which are inserted
into the gateway and they are logged in successfully.
Figure 11 - Status of the SIM cards
In Figure 12 you can see the VoIP settings.
From the Config mode menu you need to select the Single Server Mode
option. On the right side of this menu, click on the SIP Advanced
Settings link. Then choose the None option from the VoIP to PSTN
Auth Mode and click on the Save settings button.
Figure 12 - VoIP configuration
6. How to setup Ozeki VoIP GSM Gateway with an Ozeki software