Products
Ozeki 10
Apps
Connections
SMS
Email
Gamepad
Arduino
Analog Sensor
Button
Buzzer
DC Motor
DHT Sensor
Gyroscope
ID Manager
IR Transceiver
Joystick
Keyboard
LCD Display
Arduino Mega 2560
Arduino Nano
Arduino Uno
Ozeki Matrix
Raspberry PI
Protocol
Chat Control
NFC Reader
Optical Gate
RF 433 MHz
RF 2.4 GHz
RGB LED
RGB Sensor
Rotary Encoder
Servo Motors
Stepper Motors
Switch Controller
Temperature Sensor
Ultrasonic
Orientation
PBX VoIP Phone
Speech Engines
Split view camera
Autoconnect to Serial
Installation guide
Terms and Definitions
HTTP API
SMS
Bulk Messenger
Cluster
Developer tools
Robots
Hardware
Technology
Company


Ozeki 10
Keyboard Keyboard | Arduino Mega 2560 Arduino Mega 2560

LCD Display connection

LCD Display connections can send characters to LCD Displays from any connection added to your Ozeki software. This connection supports HD44780 character LCD displays. You can get them in 16x1, 16x2 and 20x4 dimensions, which represents columns x rows. Try your LCD Display as you can see in the 3rd video, below. For easier connection please try the Ozeki Display Module.

Prerequisites:

  • HD44780 LCD display (16x1, 16x2 or 20x4)
  • Ozeki 10 installed on your computer
  • Programmable board (Arduino Mega/Nano/Uno, Ozeki Display Modul or Raspberry Pi)
  • If you do not use an Ozeki Display Modul than an 1kΩ and 7.2kΩ resistor is required
  • USB cable is needed between Arduino Mega/Nano/Uno, Ozeki Display Modul and your computer

How to setup

Step 1: You can see how to wire the HD44780 LCD display
to any of the following boards:
Start the video
After wiring, please plug the board to your computer!

Step 2: Upload programcode to the microcontroller (Here is the code to upload)
Start the video

Step 3: Start Ozeki on your computer to try the LCD Display
Start the video

If Ozeki 10 is running on your computer (such as on a Raspberry Pi) and you have plugged a microcontroller to it than Ozeki can be set to find serial devices on windows/linux and place them into a connection list so you can interact and control them through the software GUI. The LCD Display Controller can communicate with Ozeki through the following protocol.


Copyright © 2000- - Ozeki Ltd | info@ozeki.hu
Home > Products > Ozeki 10 > Connections > Arduino > LCD Display
Legal | Privacy policy | Terms of use
Page: 2989 | Login | 34.231.247.139