Products
Ozeki 10
Apps
Connections
SMS
Email
Gamepad
Arduino
Analog Sensor
Button
Buzzer
DC Motor
DHT Sensor
Gyroscope
ID Manager
IR Transceiver
Joystick
Keyboard
LCD Display
NFC Reader
Arduino Mega 2560
Arduino Nano
Arduino Uno
Ozeki Matrix
Raspberry PI
Protocol
Chat Control
Optical Gate
RF 433 MHz
RF 2.4 GHz
RGB LED
RGB Sensor
Rotary Encoder
Servo Motors
Stepper Motors
Switch Controller
Temperature Sensor
Ultrasonic
Orientation
PBX VoIP Phone
Speech Engines
Split view camera
Autoconnect to Serial
Installation guide
Terms and Definitions
HTTP API
SMS
Bulk Messenger
Cluster
Developer tools
Robots
Hardware
Technology
Company


Ozeki 10
LCD Display LCD Display | Arduino Mega 2560 Arduino Mega 2560

NFC Reader connection

NFC Reader connection forwards all data read from a keycard's memory to your selected Ozeki software connection. RC522 and PN532 NFC readers are supported as NFC reader connections. You can test if your RFID keycards work by using the test GUI as you can see in the 3rd video, below.

Prerequisites:

  • A RC522 or PN532 NFC reader
  • Ozeki 10 installed on your computer
  • Programmable board (Arduino Mega/Nano/Uno, Ozeki NFC Host or Raspberry Pi)
  • USB cable is needed between Arduino Mega/Nano/Uno, Ozeki NFC Host and your computer

How to setup RC522 NFC reader

Step 1: You can see how to wire the RC522 NFC reader to any of the following boards:
Start the video
After wiring, please plug the board to your computer!

Step 2: Upload programcode to the microcontroller (Here is the code to upload)
Start the video

Step 3: Start Ozeki on your computer to try the NFC reader
Start the video

How to setup PN532 NFC reader

Step 1: You can see how to wire the PN532 NFC reader to any of the following boards:
Start the video
After wiring, please plug the board to your computer!

Step 2: Upload programcode to the microcontroller (Here is the code to upload)
Start the video

Step 3: Start Ozeki on your computer to try the NFC reader
Start the video

If Ozeki 10 is running on your computer (such as on a Raspberry Pi) and you have plugged a microcontroller to it than Ozeki can be set to find serial devices on windows/linux and place them into a connection list so you can interact and control them through the software GUI. The NFC Reader can communicate with Ozeki through the following protocol.


Copyright © 2000- - Ozeki Ltd | info@ozeki.hu
Home > Products > Ozeki 10 > Connections > Arduino > NFC Reader
Legal | Privacy policy | Terms of use
Page: 2990 | Login | 34.231.247.139