Products
Ozeki 10
Apps
Connections
SMS
Email
Gamepad
Arduino
Analog Sensor
Button
Buzzer
DC Motor
DHT Sensor
Gyroscope
ID Manager
IR Transceiver
Joystick
Keyboard
LCD Display
NFC Reader
Optical Gate
RF 433 MHz
433 MHz Module Info
Arduino Mega 2560
Arduino Nano
Arduino Uno
Ozeki Matrix
Raspberry PI
Protocol
Chat Control
RF 2.4 GHz
RGB LED
RGB Sensor
Rotary Encoder
Servo Motors
Stepper Motors
Switch Controller
Temperature Sensor
Ultrasonic
Orientation
PBX VoIP Phone
Speech Engines
Split view camera
Autoconnect to Serial
Installation guide
Terms and Definitions
HTTP API
SMS
Bulk Messenger
Cluster
Developer tools
Robots
Hardware
Technology
Company


Ozeki 10
Register Register | 433 MHz Module Info 433 MHz Module Info

RF 433 MHz Transceiver connection

RF 433MHz Transceiver connection provides two way communication between the RF transceiver and a selected connection in your Ozeki software. This RF connection forwards outside signals to your selected connection or transfers signals from one of your connections to the 433MHz radio frequency. In the 3rd video, below, you can see how 2 RF 433 MHz Transceivers communicate with eachother.

Prerequisites:

  • RF transmitter (433 MHz)
  • RF receiver (433 MHz)
  • Ozeki 10 installed on your computer
  • Programmable board (Arduino Mega/Nano/Uno, Ozeki 433Mhz RF Module or Raspberry Pi)
  • USB cable is needed between Arduino Mega/Nano/Uno, Ozeki 433Mhz RF Module and your computer

How to setup

Step 1: You can see how to wire the RF units to any of the following boards:
Start the video
After wiring, please plug the board to your computer!

Step 2: Upload programcode to the microcontroller (Here is the code to upload)
Start the video

Step 3: Start Ozeki on your computer to try the 433 MHz transceiver
Start the video

If Ozeki 10 is running on your computer (such as on a Raspberry Pi) and you have plugged a microcontroller to it than Ozeki can be set to find serial devices on windows/linux and place them into a connection list so you can interact and control them through the software GUI. The RF 433 MHz Transceiver can communicate with Ozeki through the following protocol.


Copyright © 2000- - Ozeki Ltd | info@ozeki.hu
Home > Products > Ozeki 10 > Connections > Arduino > RF 433 MHz
Legal | Privacy policy | Terms of use
Page: 2993 | Login | 34.231.247.139