Servo Controller connection
Servo Controller connection transfers commands to your servo motors from any selected Ozeki connection. This guarantees that all servo motors precisely turn to the angle specified in the commands. Each command can seperately move the motors.
How to setup
Step 2: Upload programcode to the microcontroller (Here is the code to upload)
Step 3: Start Ozeki on your computer to try the Servo Controller
If Ozeki 10 is running on your computer (such as on a Raspberry Pi) and you have plugged a microcontroller to it than Ozeki can be set to find serial devices on windows/linux and place them into a connection list so you can interact and control them through the software GUI. The Servo Controller can communicate with Ozeki through the following protocol.