Products
SMS
Ozeki NG SMS Gateway
Message Server 6
On-line manual
Introduction
SMS technology
MMS technology
About
Product features
Installation guide
User guide
Developers guide
Case studies
Appendix
A1 - OTA Bitmap
A2 - Operator logo I
A3 - Operator logo II
A4 - Ringtone
A5 - Wappush
A6 - VCalendar
A7 - VCard
A8 - Barcode
B - Service providers
C - SMSC numbers
D - GSM Operators
E - SMS alphabet
F - Error codes
G - Conn strings
H - References
I - MMSC information
J - FAQ
K - SMS Format
Download
Home
Support
How to buy
SMS Wall
IP SMS Gateway
Android SMS
Excel SMS
Ozeki Bulk Messenger
Ozeki Cluster
Developer tools
Robots
Hardware
Ozeki 10
Technology
Company


On-line manual:
  Explore all the features in this On-line HTML documentation of Ozeki Message Server 6.

Product guide:
  Download Ozeki Message Server 6 Manual in PDF format. This PDF guide explains all the features of Ozeki Message Server 6.
Ozeki Message Server 6
A2 - Operator logo I A2 - Operator logo I | A4 - Ringtone A4 - Ringtone

Appendix "A3" - Message types - Operator logo

Introduction

Operator logos are graphical images that are displayed on a phone when the phone signs into a GSM network. An operator logo is identified by a country code and a mobile network code. The GSM handsets supporting this technology can store more then one images at a time, and when the handset roams between networks, it can display the appropriate operator logo.

An operator logo is an OTA bitmap. The OTA bitmap is a black and white picture with a gray scale level of 1 to 255. OTA bitmap has a header and a body. The header has a predefined width and a height field, that specifies, how the stream of bits in the body should be broken into lines.

When designing operator logos, the designer must keep in mind, that different handset support operator logos with different dimensions. The most common bitmap size for operator logos is 72x14 pixels.

Support for operator logos in Ozeki Message Server 6

To build an operator logo it must be encoded in a binary format. This format contains a header and a body. The header specifies the operator logo version number, the Mobile Country Code (MCC) and the Mobile Network Code (MNC) fields in addition to the dimensions and the color depth of the bitmap. The body holds the OTA bitmap.

Example:

3 0 2 1 F 3 5 4 0 A 0 0 4 8 0 E 0 1 F F F F F F F F F F F F F F F F F F 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 F F F F F F F F F F F F F F F F F F 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 F 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1

Explanation:

30 Operator logo version number. ISO-8859-1 character "0"
21 F3 Mobile Country Code (MCC), octets 14 and15, little-endian BCD, filled with F16,123 -> 21 F3
54 Mobile Network Code (MNC) coding, little-endian BCD, filled with F16, 45 -> 54
0A  ISO-8859-1 "Line feed" character
00 InfoField
48  The width of the bitmap. Hex 48 -> 72 decimal
0E  The height of the bitmap. Hex 0E -> 14 decimal
01 The depth of the bitmap (number of gray scales)
FFFFFFFFFFFFFFFF
FF00000000000000
0000FFFFFFFFFFFF
FFFFFF0000000000
0000000010F00000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
0000000000000000
000000000001
 OTA bitmap data

Sending an operator logo in SMS

To send an operator logo message with Ozeki Message Server, you need to specify a message type, that tells the software that the following message is an operator logo. To send the above example, you would use the following message type:

SMS:OPLOGO

In this case, the message type is made up from two sections. The first section tells the message server that this is an SMS message. This way only the drivers supporting SMS will be considered to deliver the message. The second section is used by the driver to use the operator logo encoder. This encoder will create the protocol data unit (PDU) that will be sent as an SMS messages.

Example

If you use the database plugin, to send and receive SMS messages in Ozeki Message Server 6, you can use the following SQL statement to send an Operator Logo message:

insert into ozekimessageout (receiver,msgtype,msg,status) values
('+36205222245','SMS:OPLOGO', '3021F3540A00480E01FF...001','send');


Copyright © 2000- - Ozeki Informatics Ltd. | info@ozeki.hu | Tel: +36 1 371 0150
Home > Products > SMS > Message Server 6 > On-line manual > Appendix > A3 - Operator logo II
Page: 520 | Login